Canon LV-X6 - Manual (Page 37)

28
ᕧ Turning off the Projector
To turn off the projector:
3. Projecting an Image (Basic Operation)
WARNING
POWER
LAMP
POWER
INPUT IMAGE
ASPECT
INFO.
MENU
NO SHOW
AUTO PC
1. Press the POWER button on the projector cabinet or
the remote control. The “Power Off / OK?” message
will appear.
WARNING
LAMP
POWER
WARNING
LAMP
WARNING
LAMP
POWER POWER
Power On Fan running Standby
Steady
green light
Blinking
orange light
Steady
orange light
CAUTION:
Parts of the projector will become heated during opera-
tion. Use caution when picking up the projector immedi-
ately after it has been operating.
CAUTION:
• The projector cannot be turned off for 60 seconds after
the lamp is turned on and while the POWER indicator is
blinking green. Doing so could cause premature lamp
failure.
• Do not turn off the AC power by pressing the main power
switch or by unplugging the power cord when the pro-
jector is powered on. Doing so can cause damage to
the projector.
2. Press the OK button or press the POWERbutton
again.
The POWER indicator will glow orange. After the
projector turns off, the cooling fans keep operating
for 30 seconds (Cooling-off time).
Immediately after turning on the projector and
displaying an image, you cannot turn off the projector
for 60 seconds.
3. Turn off the Main Power switch. The power indicator
will go out.
TIP: The main power of the projector can be turned off by pressing
the main power switch or by unplugging the power cord even
during the cool down period after the projector is turned off.
NOTE: Do not turn off the main power within 10 seconds of making
adjustment or setting changes and closing the menu.
Doing so can cause loss of adjustments and settings.