Aiwa NSX-A111 - Manual (Page 13)

PROGRAMMED EDIT RECORDING
In the programmed edit recording function the tracks can be
programmed while checking the remaining time on each side of
the tape.
1 Insert the tape into deck 1.
insert the tape with the side to be recorded on first facing out
from the unit. Wind up the tape with ◄◄.
2 Press CD and load the disc(s).
3 Press CD EDIT/CHECK twice whiie pressing
SHIFT on the remote controi.
“EDIT” and “PRGM” are displayed.
•When “Al” is displayed, press CD EDIT/CHECK whiie
pressing SHIFT again.
4 Press numbered buttons on the remote controi
to designate the tape iength.
10 to 99 minutes can be specified.
• The ◄◄ and ►► are also available to designate the tape
length.
I F1CS< '■0;' ClAJSiC r- TV___________ |
i ri i ii /■; f" i fi
i ! ■ iJ i IJ [J
Tape length
Tape side A (front side)
I j
-iOoK f-Oi'
'ili
Maximum recording
time for side A
6 Repeat step 5 for the rest of the tracks for side
A.
A track whose playing time is longer than the remaining time
cannot be programmed.
7 Press CD EDiT/CHECK whiie pressing SHiFT on
the remote control to select side B and program
the tracks for side B.
After confirming “B” on the display, repeat step 5.
/■'-!)SSS ; ROCK POP CtilSSiC ^ '
i i : i ! i
■ ; ;• ; ■ ; ; Lii
Tape side B (reverse side)
8 Press CD EDIT/CHECK while pressing SHIFT on
the remote control to select side A and press #
to start recording.
CD play and recording of edited tracks for the first side start
simultaneously. When the end of tape is reached, deck 1 enters
the recording stop mode. After entering the recording stop
mode, go to step 9.
9 Press CD EDIT/CHECK while pressing SHIFT on
the remote control for recording of the second
side.
“B” is displayed.
/0 Turn over the tape in deck 1 and press # to start
recording.
Recording starts.
To stop recording
Press M/± on deck 1. Recording and CD play stop
simultaneously.
To check the order of the programmed track numbers
Before recording, press CD EDIT/CHECK while pressing SHIFT
on the remote control to select side A or B, and press ◄◄ or
repeatedly.
Tape side Program number
ROCK POP
■ ; ■
■ ; ■ ■ ■ ■ :
Track number Programmed
track numbers
a
z
Q
a
o
o
UJ
«
5 Press DISC DIRECT PLAY 1-3 to select a disc.
Then, press numbered buttons 0-9 and + 10 on
the remote control to program a track.
Example: To select the 10th track of disc 2, press DISC
DIFIECT PLAY 2, then press +10 and 0.
Selected track number Remaining time on side A
. i ' ;«5 I RCCK 1=0* CcAiSIC - ........
• H M n -
Li i ^ ^
Program number Programmed tracks
To change the program of each side
Press CD EDIT/CHECK while pressing SHIFT on the remote
control to select side A or B, and press ■ CLEAR to clear the
program on the selected side. Then program tracks again.
To clear the edit program
Press ■ CLEAR twice so that “EDIT” disappears on the display.
' Up to 30 tracks can be programmed from any of the inserted
discs.
' “FULL” is displayed if you attempt to program more than 30
tracks.
ENGLISH
1 3