Choosing the proper site for your freezer, Electricity connection, Starting up and temperature adjustment – Avanti 494 VFYW User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
<- ■ 1.'^
i
^ \
Dear user,
This guide is prepared to assist you
in using your freezer which is
manufactured with great care in
most recent technology with the
highest efficiency.
Please read this guide carefully
before starting up your freezer.
CHOOSING THE PROPER SITE
FOR YOUR FREEZER
Place your freezer, as far away as
possible from sources of heat like
the stove, central heating radiator,
electric stove or oven. (It should be
at least 30-40 cm away)
Place your freezer whose one side
is at least 5 cm away from the wall.
Make sure that there is a free
distance above the top of the
appliance.
The location you will chose for your
freezer should be if possible, away
from sun rays by means of curtains,
blinds and the like.
Place your freezer in a place
without humidity. It is normal for the
black grid at the rear of your
freezer to warm up and even to get
hot. In order for this heat to be
dispersed never cover up the upper
rear part and over the lower front
grid part. Do not prevent the
circulation of air In the room. The
room temperature should be more
than +8 ‘C. Otherwise, it is not
appropriate for your freezer.
If you place your freezer near a
refrigerator, make sure that the
refrigerator is at least 2 cm away.
Make your freezer stay level by
adjusting the screw legs against
probable uneven parts of the floor.
Do not hold your freezer by the
door handle when placing or when
moving it.
ELECTRICITY CONNECTION
The plug of your refrigerator is a
grounded plug and you must
connect it to a grounded socket
outlet.
Have a qualified electrician connect
a grounded socket outlet, if
necessary. This appliance should be
properly grounded for your safety.
* An extension cord should not be
used.
STARTING UP AND
TEMPERATURE ADJUSTMENT
Clean the interior of the cabinet
before starting up (see CLEANING).
After being sure that there is
electricity in the socket then put the
plug Into the socket.
Turn the temperature switch to a
sufficient place. The compressor will
begin to work. The temperature
positions are indicated from 1 to 6
on the temperature selector (the dial
on the temperature switch)
0 indicates closed
1 indicates the least cold
6 indicates the coldest position
Not(1). The first running of your freezer may last approximately 12 hours. This Is not an error.