Safety – Vermont Casting VCS4005 User Manual
Page 6
• Always promptly shut off the gas supply and immediately extinguish all flames if you smell gas.
Always seek assistance from your gas supplier or local Fire Department if the gas smell persists,
because of the danger of fire or explosion.
• Always confirm that there are no gas leaks before lighting this Grill. Apply a 50/50 solution of
liquid soap and water to the gas supply line connectors with a brush or spray bottle, and watch
for bubbles. Never use a match or open flame to test for gas leaks.
• Always visually inspect the gas supply line for fraying, cracking or rodent damage before each
use of this Grill and, if necessary, install a replacement before lighting this Grill.
• Never permit a gas supply line to contact any heated surface of this Grill.
D. PREVENTION OF BURNS
• Always keep children and pets under close supervision when using this Grill, and never permit
them to come near the Grill while it is in use, as the exterior surfaces will be very hot.
• Always wear insulated protective mitts when working at the Grill, or when attempting to close
a gas supply valve after cooking has been completed, to prevent possible burns. Always use
insulated pot holders when handling containers of hot food.
• Always wear an insulated protective mitt when adding a smoking agent to a Smoker Box.
• Never store or use gasoline or other flammable or volatile substances in the vicinity of this Grill,
or in the vicinity of any other heat-generating appliance.
E. ELECTRICAL SAFETY
• Always confirm that this Grill has been grounded in accordance with local Codes or, in the
absence of local Codes, with the National Electrical Code, ANSI/NFPA No. 70 or the Canadian
Electrical Code, CSA C22.1, when an external electrical source is being utilized for the Rotis-
serie Motor.
• Always use a grounded three-prong outlet and a three-prong extension cord to energize the Ro-
tisserie Motor. Never alter or remove the grounding prong on the Rotisserie Power Cord, as an
electric shock hazard would then result.
• Never permit an electrical supply cord to contact any heated surface of this Grill.
Safety
Page v