Vermont Casting VCS4005 - Manual (Page 17)

Operation
Page 11
Fig. 13
Control
knob
Igniter
Lighting the Side Burner (if applicable)
WARNING: Never stand with your head directly over the Grill when preparing to light the side burner,
to prevent possible bodily injury.
1. Turn the side burner control knob to HIGH (see Fig. 13).
2a. PIEZO IGNITION SYSTEM - Turn the Igniter Knob clockwise until the burner ignites. The burner
should light within four clicks of the igniter.
2b. ELECTRONIC IGNITION SYSTEM - Push and hold the Igniter Button until the burner ignites.
The burner should light within five seconds.
NOTE: Observe the flame pattern. Soft blue flames are normal ; hard blue flames or wavy yellow flames are
not. You can adjust the flame with the air shutter below the control knob (see Fig 19). If yellow flames persist,
refer to the Troubleshooting Guide on Page 22.
SHUTTING THE BURNER OFF
1. Turn the control knob counterclockwise to the HIGH position, then depress it and turn it to OFF.
NEVER force the knob without depressing it, as that can damage the valve.
(Single Burner with PIEZO IGNITION SYSTEM shown)