Ashly Parametric Equalizers PQ-16 - Manual (Page 2)

specifications
CONTROLS
Master Gain; ±15dB
Master Defeat Switch: YES
Per Band Ampiitude: ±15dB
Per Band Defeat Switch: YES
PEAKING FREQUENCY
Low: 16HZ-800HZ
Low Mid: 50Hz-2.4kHz
Hi Mid; 160Hz-8kHz
High: 500Hz-24kHz
Bandwidth: 3 1/3 -1/20 octave
SHELViNG FREQUENCY
Low; 30-300HZ
High: 700Hz-8kHz
Sheiving Range: ±15dB
Input Impedance; lOkQ active balanced bridging
Output Impedance: 200Q, term. W/600Q or more
Maximum Input Level: +20dBm{+5dBm at max boost,
full sharp)
Frequency Response; 20Hz-20kHz, ±.5dB
Distortion: <.05%THD, +10dBV 20Hz 20kHz
Hum and Noise: -87dBV(EQ in), -95dBV(EQ out)
Power Requirements: 110-125VAC, 50-60HZ, 5W
Size: PQ-26: 19"Lx 3.5"H x6”D
PQ-16: 19"Lx1.75"Hx6"D
Shipping Weight: PQ-26:10 lbs
PQ-16: 8 lbs
Architect’s Specification
Ashly PQ-26
The untt shall be a du&l channel parametric equalizer,
capable of being center-frcquency-tunablc over a 5,S
octave range. The unit «hall have two channels of 4
bands of equalization adjustable as follows: Low: iGHz'
800H
e , L ow Mid: 50Hz-2,4kHz, High Mid: l60Hz-SkHz,
and High: SOOHz-24kHz, Each band shall have a band'
width adjustable between 8 1/3 octave and t/20
octave. The frequency response shall be 20Hz-2QkHz,
tO.SdB. The distortion shall not eiceed <0,05% THD,
tlOdBV, 20Hz-2OkHz. Hum and noise shall be below -
S7dBV with Che EQ engaged and ’95dBV with (he EQ
out. The unit shall offer a per band amplitude adjust­
ment of ±l5dB as well as a master gain adjustment of
tl5 dB. The unit shall also Include Low frequency and
high frequency shelving covering the range of 30-30QHz
and 700Hz to 6kHz respectively, The range of the shelv­
ing equalization shall be ±l5dB. The Input Impedance of
Che unit shall be 10ki2 active balanced bridging, and the
output impedance shall be 200Ü, terminated with 60Û11
or more. The maximum in/out level shall be f20dBm or
■t‘5dBm at maximum boost, full sharp, The unit shall be
designed for mounting In a standard EÏA 19'' rack (t9' L
X 3.5"H z 6"D) and shall have a shipping weight of
LOlbs , The unit shali operate at 115VAC t5%> 50'6CHz.
The unit shall be a P9‘26 Parametric Equalizer manu­
factured by Ashly Audio Inc, No other unit shall be
acceptable unless data submitted from an independent
test laboratory verities that the above combined
size/performance specs are met.
Ashly PQ-16
The unit shall be a single channel parametric equalizer,
capable of being center-frequency'tunable over a 5.5
octave range. The unit shall have a single channel of 4
bands of equalization adjustable as follows: Low: l6Hz-
800Hz, Low Mid: 50Hz 2.4kHz, High Mid: 160Hz-8kHz,
and High: 500Hz-24kHz, Each band shall have a band­
width adjustable between 3 1/3 octave and 1/20
octave. The frequency response shall be 20Hz-20kHz,
±0.5dB. The distortion shall not exceed <0.05% THD,
-rlOdBV, 20Hz-20kHz, Hum and noise shall be below -
87dBV with the EQ engaged and -95dBV with the EQ
out. The unit shall offer a per band amplitude adjust­
ment of il5dB as well as a master gain adjustment of
±15 dB. The unit shall also include low frequency and
high frequency shelving covering the range of 30-300Hz
and 700Hz to 8kHz respectively. The range of the shelv­
ing equalization shall be il5d6. The Input Impedance of
the unit shall be lOkii active balanced bridging, and the
output Impedance shall be 200il. terminated with 600ti
or more. The maximum in/out level shall be +20dBm or
+5dBm at maximum boost, full sharp. The unit shall he
designed for mounting in a standard Б1А 19'' rack (19"L
X 1,75"H
к 6”D) and shali have a shipping weight of
Slbs. The unit shall operate at 115VAC ±5%, 50-60Hz.
The unit shall be a model РЗ'^в Parametric Equalizer
manufactured by Ashly Audio Inc. No other unit shall be
acceptable unless data submitted from an independent
test laboratory verities that the above combined
size/performance specs are met.
AshEy Audio Inc.
ASHI-Y
Since 1972
© ]9a0 Ashly Audio