Brake adjustment – Bolens 137-465A User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 8. Remove the engine belt guard by
removing the two front engine mounting
bolts. See figure 33.
Step 9. Place the clutch lockout in the START
position. See figure 10.
Step 10. While pushing the variable speed pulley
towards the center of the rider, remove
the lower belt from the transmission
pulley. See figure 33.
Step 11. Slide the movable center section of the
variable speed pulley away from the
rider and remove the upper belt from the
variable speed pulley. See figure 34.
Lower Belt
FIGURE 33.
mm
Step 12. Unhook the upper belt from the engine
pulley and remove. See figure 35.
Step 13. Reassemble in reverse order with new
belts.
FIGURE 35. REMOVING THE UPPER BELT
BRAKE ADJUSTMENT
To adjust the brake on your rider follow these
steps:
Step 1. Depress the brake pedal and lift the brake
lock so the pedal stays in the depressed
position. See figure 9.
Step 2. Place the clutch lockout in the START
position. See figure 10.
FIGURE 34. REMOVING FROM VARIABLE SPEED FIGURE 36. BRAKE ADJUSTMENT
15