530 a – Bolens 113-530 A User Manual

Page 3

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Text mode
Original mode

120-----

1 1 3 - 5 3 0 A

NOTE: Set screws in pulleys are treated with a
nut and bolt sealant. Remove with Allen 4-CYCLE ENGINE
wrench while applying heat with a small torch.

Change oil after first 5 hours of
operation while engine is warm.

Sealant disintegrates at 400*^.

Thereafter, change oil every 25 hours
of operation while engine is warm.
Engine may be drained through oil
filler opening. Be sure to replace drain
plug and oil filler cap.

For Upper Handle:

Chrome - 9354
White - 749-111

NOTE: To engage the
blade with the engine
running:

Move the throttle

control

lever

"FAST" position.

Engage the blade

engagement lever
SLOWLY.

A d j u s t e n g i n e

speed.