Autostart AS-6270 - Manual (Page 8)

Priority Door Access
This safety feature lets you unlock only the driver’s door when you press the unlock
button on the transmitter, and then unlock the rest of the vehicle doors if the unlock
button is pressed for a second time within 3 seconds.
Chirp Delete
To temporarily disable the siren’s chirp confirmations upon arming and disarming (e.g. in
a quiet neighbourhood):
1. Press the trunk button, the Parking Light will flash once
2. Within 3 seconds, press the lock or unlock button to arm or disarm without any
chirps.
Note: Your installer can program the Chirps Disabled feature if you want the chirps to be
permanently disabled.
Shock Delete
The shock sensor can be temporarily disabled. To temporarily disable shock and
warn-away sense:
Press the trunk button and, within 3 seconds,
Press the stop button.
Shock senses will now be ignored until the next disarming of the system.
User-selectable Options
The system was designed with flexibility and OEM integration in mind. With its
programmable options, this unit can single-handedly control nearly any electrical system
in your vehicle.
Note: The programming of your system should be left to a professional. Changing any one of
the settings may affect the operation of your system.
The user-selectable options are as follows:
Safe Start Ignition Re-Lock
Remote Door Locks Secure Lock
Passive or Active Arming Remote Trunk Release
Disarm Notification Starter Kill
Shock Sense and Warn-Away Sense Engine Run Time
Siren Chirps
Ignition-Controlled Door Locks Multi-Car Operation
Safe Start
Safety feature: Safe Start features will prevent accidental remote starts.
If this feature is enabled, the user must press the start button 2 times within 3 seconds
to remote-start the vehicle.
If Swap Start Mode has been configured by your installer, to remote-start your vehicle
press
lock and unlock simultaneously. (Press start to trigger the aux 2 output.)
Safe Start features will eliminate accidental remote starts, e.g. when there are children
playing with the transmitter.
P. 8 User Guide
Remote Door Locks
If your system was installed with the Remote Door Locks option, you will have the
convenience of remote keyless entry.
To
unlock your doors and disarm the system:
1. Press and hold the unlock button for approx. 1 sec.
2. The parking lights will flash twice and the LED will go out to confirm that the doors
have been unlocked, that the Starter Kill feature is disarmed (if it was installed) and
that the Alarm is disabled.
To lock your doors and arm the system:
1. Press and hold the lock button for approx. 1 sec.
2. The parking lights will flash once and the LED will flash slowly to confirm that the
doors have been locked, that the Starter Kill feature is enabled (if it was installed)
and that the Alarm is armed.
Passive or Active Arming
By default, the system is configured to Passive Arming Mode. In Passive Arming Mode,
the Starter Kill and the Alarm will automatically arm 30 seconds after the last door is
closed. The system will not arm itself if a door is left open.
Important note: When the system re-arms automatically or if there is an Alarm condition, you
can disarm the system by simply pressing the unlock button.
Disarmed Notification
( off by default.) This feature will notify the user when the vehicle was left disarmed: after
the Engine has been shut down and all doors have been closed, after 10 seconds the
horn will honk once if the doors have been left unlocked.
Shock Sense And Warn-Away Sense
(Both enabled by default.) This system can react to a full shock by triggering the Alarm; it
can also respond to a lighter shock (30 % of the strength of a full shock) by giving a
warn-away (without triggering an Alarm condition). When the Engine is running after a
remote start, however, the system will prevent any Alarm condition to be triggered ;
it will still give a warning sound if
warn-away is enabled.
Siren Chirps
(On by default.) The siren will chirp to confirm the system's basic operations:
By default, when the doors are being locked the siren will give one chirp if none of the
zones are active.
If a zone is active as the doors are being locked, the siren will give three chirps.
When the doors are being unlocked, the siren will give two chirps if no intrusion was
detected.
If an intrusion was detected, as the doors are being unlocked the siren will give four
chirps.
The system can alternatively be set to:
Warning Mode (no chirp during lock/unlock - unless a zone is active when locking, in
which case there will be 3 chirp upon locking - or unless the alarm was triggered, in
which case there will be 4 chirps when unlocking);
Open Zone Notification (the system will warn for doors opened up to 10 seconds after
arming).
No Chirp (the vehicle will not chirp under any circumstance).
User Guide P. 9