beautypg.com

Ll^^j – Autostart AS-6270 User Manual

Page 3

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Transmitter Part Number:

The installer is to write in the boxes below the Module’s serial number and the location of
the Valet Switch.

Module Serial Number:

[

]

^

alet^witch

j^^^^^^

n^a

ll^^J

Introduction

This Module is a state-of-the-art combination of an Alarm system and a remote car
starter. It represents a major breakthrough in vehicle security technology and remote
starter systems. This unit is distributed with a super-heterodyne antenna with range of up
to 1500 feet / 450 m.

Basic Remote Operation

This system is equipped with a 5-button multi-channel transmitter. It can operate two in­
dependent identically-equipped vehicles (see Multi-Car Operation for second-car
transmitter functions).

The functions of the transmitter are as follows:

UNLOCK

: Unlocks the doors

and disarms the STARTER
KILL. Activates the AUX 2
output if priority door access
is configured.
Triggers Panic if pressed
more than 3 seconds

STOP:

Stops the engine if pressed

for less than 3 seconds or triggers

Panic mode if pressed for more than
3 seconds.

START

: Remote starts the

engine or gets the system
into Cold Weather mode if
pressed for 3 seconds.

Note:

Pressing the

lock

and

unlock

buttons at the same time will activate the

aux

2

output.

Remote-starting Your Vehicle

Setting Your Vehicle Into Ready Mode

In order to start the vehicle by remote, the unit must first be set to Ready Mode. If the unit
is not set to Ready Mode, it cannot remote-start the vehicle.

User Guide

P. 3