Aiwa NSX-A115 - Manual (Page 13)

PROGRAMMED EDIT RECORDING
3
,
7
,
8,9
5
4,5
3
,
7
,
8,9
In the programmed edit recording function the tracks can be
programmed while checking the remaining time on each side of
the tape.
1 Insert the tape into deck 1.
Insert the tape with the side to be recorded on first facing out
from the unit. Wind up the tape with ◄◄.
2 Press CD and load the disc(s).
3 Press CD EDIT/CHECK twice while pressing
SHIFT on the remote control.
“EDIT” and “PRGM” are displayed.
• When “Al” is displayed, press
CD EDIT/CHECK while
pressing SHIFT again.
4 Press numbered buttons on the remote control
to designate the tape length.
10 to 99 minutes can be specified.
• The ◄◄ and ►► are also available to designate the tape
length.
Tape side A (front side)
'
r.
;
;■■■■ n i " i ! m
O
mnn-
■
Tape length Maximum recording
time for side A
Repeat step 5 for the rest of the tracks for side
A.
A track whose playing time is longer than the remaining time
cannot be programmed.
Press CD EDIT/CHECK while pressing SHIFT on
the remote control to select side B and program
the tracks for side B.
After confirming “B” on the display, repeat step 5.
POOK POP CLASS'C
; ; ;• ! ■ ;
‘i ■ !• ! ■ i
Tape side B (reverse side)
8 Press CD EDIT/CHECK while pressing SHIFT on
the remote control to select side A and press #
to start recording.
CD play and recording of edited tracks for the first side start
simultaneously. When the end of tape is reached, deck 1 enters
the recording stop mode. After entering the recording stop
mode, go to step 9.
9 Press CD EDIT/CHECK while pressing SHIFT on
the remote control for recording of the second
side.
“B” is displayed.
10 Turn over the tape in deck 1 and press • to start
recording.
Recording starts.
To stop recording
Press U / ± on deck 1. Recording and CD play stop
simultaneously.
To check the order of the programmed track numbers
Before recording, press CD EDIT/CHECK while pressing SHIFT
on the remote control to select side A or B, and press ◄◄ or
repeatedly.
Tape side
' Z J
Program number
ROCK POP
i ;
T
Track number
.. ■■ V___;
' 'l
Programmed
track numbers
O
z
Q
EC
O
o
III
EC
5 Press DISC DIRECT PLAY 1-3 to select a disc.
Then, press numbered buttons 0-9 and + 10 on
the remote controi to program a track.
Example; To select the 10th track of disc 2, press DISC
DIRECT PLAY 2, then press +10 and 0.
Selected track number Remaining time on side A
k ' -Ji . ...... ........ ....... r-s
1 n -n in n ^ I-----------------------
-■■"i ; i : i i’ : i ]
■ ■' ^ n........ '■■■
Program number Programmed tracks
To change the program of each side
Press CD EDIT/CHECK while pressing SHIFT on the remote
control to select side A or B, and press ■ CLEAR to clear the
program on the selected side. Then program tracks again.
To clear the edit program
Press ■ CLEAR twice so that “EDIT” disappears on the display.
' Up to 30 tracks can be programmed from any of the inserted
discs.
' “FULL’ is displayed if you attempt to program more than 30
tracks.
ENGLISH
1 3