Aiwa AV-D35 - Manual (Page 8)

BEFORE OPERATION
POWER TAPE MONITOR
To turn the unit on
Press the POWER button.
Operation is possible after four seconds. When the POWER
button is pressed to turn on, the VOL (volume) level or function
name is displayed one after the other.
The selected function indicator lights up in red and the others in
green.
To change the brightness level of the display
1 Press ECO so that “ECO MODE” is displayed.
2 Within 4 seconds, turn the MULTI JOG to display DIM MODE,
and then press the ENTER button within 4 seconds.
3 Within 4 seconds, turn the MULTI JOG to select the dimmer
mode as below.
The mode will be automatically set after 4 seconds. It will
also be set if the ENTER button is pressed within 4 seconds
after step 3.
DIM OFF ◄-►DIMMER DIMMER 2-<-► DIMMERS'«
[! □
To select the front speaker system
To use speaker system A: Set the FRONT SPEAKERS A button
to .M.ON.
To use speaker system B: Set the FRONT SPEAKERS B button
to *ON.
To use both speaker systems: Set both the buttons to *ON.
Set the button(s) to J.OFF to turn off the speaker system(s).
NOTE
As the front speaker systems A and B are connected in series:
- The sound will be slightly decreased when using both speaker
systems
- No sound can be heard if the FRONT SPEAKERS A and B
buttons are set to .&ON when only one speaker system is
connected
Using the headphones
Connect headphones to the PHONES jack with a standard stereo
plug (
06.3 mm, 1/4 inch). Be sure to set the FRONT SPEAKERS
A and B buttons to JLOFF. Otherwise sound is output from the
speakers.
The 5.1 CH function, Dolby Pro Logic or DSP system is
automaticaliy canceled when the headphones are plugged in.
To turn the unit off, press the POWER button.
DIM-OFF: The normal display.
DIMMER 1: The illumination of the display is dimmer than
usual.
DIMMER 2: The illumination of the display is dimmer than
DIMMER 1.
DIMMER 3: The illumination of the display is dimmer than
DIMMER 2. The function indicators light off.
7 ENGLISH