To play a dvd recorded in dolby digital surround, Recording an audio source, 2 press the video 1/5.1 ch/band button – Aiwa AV-D35 User Manual

Page 13: 1 select the program source to be recorded, 3 start the selected program source, Recording aim audio source

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TO PLAY A DVD RECORDED IN DOLBY

DIGITAL SURROUND

This receiver has the 5.1 INPUT connectors supporting Dolby

Digital decoder with the 5.1 ch output terminals. When a DVD

player that contains a Dolby Digital decoder is connected to the

receiver, you can enjoy theater-quality audio right in your home

when playing discs recorded in Dolby Digital Surround.

1 Turn the FUNCTION selector to select the VIDEO

1/DVD/MD function.

RECORDING AN AUDIO SOURCE

(/)

2 Press the VIDEO 1/5.1 CH/BAND button.

:[hl

“5.1 ch IN” appears on the display and the DVD player
connected to the 5.1 INPUT terminals is selected as a source.

3 Start playing the DVD recorded in Dolby Digital

Surround.

NOTE

• The 5.1 CH function is automatically canceled and the VIDEO

1, DVD or MD function is selected:

- when the Dolby Pro Logic is turned on
- when headphones are plugged in

• The 5.1 CH function cannot be selected while headphones are

plugged in.

1 Select the program source to be recorded.

Turn the FUNCTION selector.

2 Set the tape deck or MD recorder to the recording

mode.

3 Start the selected program source.

To monitor recorded sound during recording (when the

connected tape deck is a three-head systemi)

Press the TAPE MONITOR button. “TAPE ON” appears on the

display for four seconds, and then the source name selected in
step 1 comes back on. To cancel the tape monitor, press it again

so that “TAPE OFF-” appears.

> Any sound control system has no effect on recording (see pacje

) . '

’ Input sound through the 5.1 INPUT terminals cannot be

recorded. When recording the sound from the DVD player,
connect the AUDIO OUT (DOWN MIXING) terminals of the DVD
player to the VIDEO 1/DVD/MD AUDIO IN terminals of the unit,

' When recording sources by the MD recorder connected to the

VIDEO 1/DVD/MD AUDIO OUT terminals, first press the

ENTER button to display VIDEO 1, and turn the MULTI JOG to

select VIDEO 2 or VIDEO 3. Then select the source (V2 or V3
should be displayed).
Recording cannot be done while the VI indication is displayed
on the window.

’ Input sound from the tape deck connected to the TAPE

MONITOR IN terminals cannot be recorded.

ENGLISH

1 2