Aiwa AV-D35 - Manual (Page 4)

PREPARATIO
CONNECTIONS
Before connecting the AC cord
The rated voltage of your unit shown on the rear panel is 120 V
AC. Check that the rated voltage matches your local voltage.
IMPORTANT
Connect the speakers, antennas, and all other external
equipment first. Then connect the AC cord at the end.
CONNECTING EQUIPMENT
Jacks and plugs of the connecting cord are color-coded as
follows:
Red jacks and plugs : For the right channel of audio signals
White jacks and plugs: For the left channel of audio signals
Yellow jacks and plugs: For video signals.
Insert the plugs fully into the jacks. Loose connections may
produce a humming sound or other noise interference.
Be sure to connect the VIDEO OUT terminal of a DVD player
directly to a TV set, not through this unit. Otherwise, the picture
noise may appear when playing the DVDs copy protected.
Input sound through the 5.1 INPUT terminals cannot be
recorded. When recording the sound from the DVD player,
connect the AUDIO OUT (DOWN MIXING) terminals of the
DVD player to the VIDEO 1/DVD/MD AUDIO IN terminals of
the unit.
When connecting a monaural video, use a stereo-mono
connecting cord (not supplied).
DVD or Video 1/MD player*'
Camcorder
(§)
VIDE
to VIDEO OUT,
) IN L-AUDIO ;N-R
to AUDIO OUT
ENGLISH