Aiwa AV-X220 - Manual (Page 17)

CARE AND MAINTENANCE SPECIFICATIONS
Occasional care and maintenance of the unit is needed to
optimize the performance of your unit.
To clean the cabinet
Use a soft dry cloth.
If the surfaces are extremely dirty, use a soft cloth lightly
moistened with mild detergent solution. Do not use strong
solvents, such as alcohol, benzine or thinner as these could
damage the finish of the unit.
FM tuner section
Tuning range 87.5 MHz to 108 MHz
Usabie sensitivity 13.2 dBf
(IHF)
Antenna terminals 75 ohms (unbalanced)
cc <
Uj cc
H Ul
(3
AM tuner section
Tuning range
Usabie sensitivity
Antenna
530 kHz to 1710 kHz (10 kHz step),
531 kHz to 1602 kHz (9 kHz step)
350 pV/m
Loop antenna
Amplifier section
Power output [Stereo Mode]
Total harmonic
distortion
inputs
Outputs
Front
125 watts per channel, Min. RMS at 4
or 8 ohms, from 40 Hz to 20 kHz, with
no more than 0.8% Total Harmonic
Distortion
[Dolby Pro Logic Mode]
Front
120 watts per channel, Min. RMS at 4
or 8 ohms (selectable), from 40 Hz to
20 kHz, with no more than 0.9% Total
Harmonic Distortion
Rear (Surround)
60 watts per channel, Min. RMS at 8
ohms, 1 kHz, with no more than 0.9%
Total Harmonic Distortion
Center
120 watts, Min. RMS at 4 or 8 ohms
(selectable), 1 kHz, with no more than
0.9% Total Harmonic Distortion
0.07 % (105 W, 1 kHz, 8 ohms. Front)
AUDIO IN
PHONO: 2.8 mV (50 kohms)
CD: 370 mV (50 kohms)
TAPE MONITOR: 200 mV (25
kohms)
VIDEO 1, VIDEO 2/LD/MD,
VIDEO 3, AUX7TV: 370 mV (50
kohms)
VIDEEO IN: 1 Vp-p (75 ohms)
AUDIO OUT (REC OUT): 230 mV (2
kohms)
VIDEO OUT (MONITOR): 1 Vp-p (75
ohms)
SUPER WOOFER: 3.1 V
FRONT SPEAKERS IMP: 80/40
selectable (front speakers A and B):
With the SPEAKER IMPEDANCE
SELECTOR set to 40, accepts
speakers of 4 ohms.
With the SPEAKER IMPEDANCE
SELECTOR set to 80, accepts
speakers of 8 ohms or more.
SURROUND SPEAKERS IMP: 80
(surround speakers): accepts
speakers of 8 ohms or more
ENGLISH 1 6