Cables to Go TE100-S55 - Manual (Page 36)

36
Installing XPressView
Installing the XPressView SNMP Management program is easy to
do and only takes a few minutes. The supplied SETUP program
guides you through the process.
W
HAT YOU NEED
To use XPressView, your computer must have the following:
Processor: 386, 486 or Pentium
RAM: 2 megabytes minimum
Disk Space: 10 megabytes minimum
Windows: 3.1, 3.11 or Win95
TCP/IP Winsock interface
(It is recommended to set the IP address
at 168.8.xx.xx, similar to the TE100-
S55 IP address)
Drive: 1.44 Floppy
Display: VGA
T
O INSTALL
XP
RESS
V
IEW
• Run Windows and close all programs that are active.
• Insert the supplied XPressView diskette into your floppy
drive.
• From Windows Program Manager or Explorer, click the
floppy drive that contains XPressView, and click the SETUP
command. The setup screen will appear. Accept or modify
the Destination Directory and click NEXT.
• The XPressView program icon will automatically be added to
your Windows start screen.