Cables to Go TE100-S55 - Manual (Page 12)

12
Features of TE100-S55
Utilizing the latest Fast Ethernet and Switching technologies, the
TRENDnet TE100-S55 is designed to provide:
• Five 10/100Mbps dual-speed Ethernet ports
• One expansion slot with multiple configuration options:
8 switched ports for 10Base-T OR
2 switched port for 100Base-FX/TX OR
1 ISDN router (up to 128Kbps)
• NWAY Auto-negotiation for each network port providing
auto-detection of connected cable type, auto-sensing of full
or half duplex signaling and auto-configuration.
• Full or half-duplexing.
• Store-and-forward packet switching.
• The IEEE 802.1d Spanning Tree Algorithm for network loop
detection and prevention and topology re-configuration.
• Native SNMP management support with Ethernet
MIB II (RFC 1284) and bridge MIB (RFC 1286).
• Dynamic, automatic self-learning network configuration that
is refreshed every three minutes for maximum performance.
• VLAN support.
• 4,096 maximum entries for MAC Address Table.
• One RS-232 port for local/remote Out-of-Band management.
• The EEPROM (flash memory) for firmware upgrade.
• Comprehensive LED display of the system/port status.
• Self-test during power on to ensure system integrity.