Cables to Go TE100-S55 - Manual (Page 18)

18
M OUNTING
The TE100-S55 can be placed either on a table or rack mounted.
For rack mounting: First screw the pair of mounting brackets
(included in the packing carton) onto the switch. Then, mount the
TE100-S55 onto the rack, as shown below in Figure 2-5.
A
TTACHING
C
ABLES
There are five RJ-45 ports on the TE100-S55 for connecting five
workstations or LAN segments. Each port supports either
10Base-T or 100Base-TX networks, auto-detecting the type of
connection. For 100Base-TX connection, two-pair Category 5
UTP (or Type 1 STP) cabling is required. For the 10Base-T
connection, two-pair Category 3, 4 or 5 UTP is required.
Figure Chapter 2 -5, Rack mounting a TE100-S55