Cables to Go TE100-S55 - Manual (Page 14)

14
The TE100-S55 fits into the 100Base-T cabling architecture as a
switch. Therefore, unlimited number of switches may be installed
in the same network with maximum distances of 100 meters apart.
The 10/100Mb ports of TE100-S55 require two-pair Cat5 UTP
(or Type 1 STP) for 100Base-TX connections. For 10Base-T
connections, two-pair Cat 3, 4 or 5 UTP cables are required.
Figure Chapter 2 -1, Example of TE100-S55 wiring
environment