Casio KL-7200E - Manual (Page 23)

E-22
4. Use a cotton swab dipped in alcohol to clean
the printer head and roller as shown in the
illustration.
5. Replace the tape cartridge and close the cover.
Initial Power On Settings
The following are the initial settings of the Label Printer whenever you turn it
power on.
Initializing the Label Printer
If you experience serious malfunction of the Label Printer or if operation fails
completely, try performing the following operation to initialize the printer.
Important!
• Initializing the Label Printer deletes all memory contents. Make sure you have
a back-up copy of text stored in memory if you need it.
To initialize the Label Printer
1. Turn power off.
2. While holding down the PRINT and ESC keys, press ON/OFF to turn power on.
• This prompt confirms whether or not you want to initialize the Label Printer.
I N I T I A L ?
3. Release the PRINT, ESC, and ON/OFF keys.
4. Press SET to initialize the Label Printer or ESC to abort the reset operation.
•
The following table shows the initial settings.
Currency Conversion initial settings
Bar Code initial setting
Roller
Printer head
Item Power On
6mm tape...1
×
1
SIZE AUTO SIZE 9mm tape...2
×
2
12mm, 18mm, 24mm tapes...3 × 3
EFFECT CANCEL
STYLE NORMAL
MIRROR OFF
M-FEED NO
Item
Display
Memory
SYMBOL
SIZE
EFFECT
STYLE
M-FEED
MIRROR
MEMO
DENSITY
CONTRAST
Reset
Cleared
Cleared
,
AUTO
CANCEL
NORMAL
NO
OFF
STORE
3
Level 16
Item
Menu
CURRENCY A
CURRENCY B
ROUND
FORMAT
PRINT A → B
PRINT B
→
A
RATE
Reset
CUR
Cleared
2
1
Cleared
Cleared
Cleared
Item
Menu
Text
Size
Reset
EAN-13
Cleared
M (MEDIUM)