Using another dhcp server, To configure your pcs to use dhcp – CNET CNWR-811P User Manual

Page 40

Text mode
Original mode

DHCP

Using another DHCP Server

You can only use one (1) DHCP Server. If you wish to use another DHCP Server, rather than
the CNWR-811P’s, the following procedure is required.
1. Disable the DHCP Server feature in the CNWR-811P. This setting is on the LAN screen.
2. Configure the DHCP Server to provide the CNWR-811P’s IP Address as the Default

Gateway.

To Configure your PCs to use DHCP

This is the default setting for TCP/IP under Windows 95/98/ME. See Chapter 4 – Client
Configuration for the procedure to check these settings.