Chapter 4 pc configuration, Overview, Tcp/ip settings – CNET CNWR-811P User Manual
Page 28: Overview tcp/ip settings, Pc configur, Pc configur pc configura a a ation tion tion tion

25
Chapter 4
Chapter 4
Chapter 4
Chapter 4
PC Configur
PC Configur
PC Configur
PC Configura
a
a
ation
tion
tion
tion
This Chapter details the PC Configuration required on the local ("Internal")
LAN.
Overview
For each PC, the following may to be configured:
• TCP/IP network settings
• Internet Access configuration
• Network printer
• Wireless configuration
TCP/IP Settings
If using the default CNWR-811P settings, and the default Windows 95/98 TCP/IP settings, no
changes need to be made.
• By default, the CNWR-811P will act as a DHCP Server, automatically providing a suitable
IP Address to each PC when the PC boots.
• The default Windows 95/98 TCP/IP setting is to act as a DHCP client.
To check your PC's TCP/IP Settings:
1. Select Control Panel - Network. You should see a screen like the following:
Figure 14: Network Configuration
2. Select the TCP/IP protocol for your network card.
3. Click on the Properties button. You should then see a screen like the following.
4