Bowflex Xtreme 2 SE - Manual (Page 15)

Bowflex Xtreme ® 2 SE Assembly Manual 11
step 10 Install Leg Extension
Assembly
Parts:
• Leg Extension Assembly
• Lock Knob
• Seat Assembly
10-1 Insert Leg Extension Backbone
into open end of Seat Backbone
as shown .
10-2 Align one hole of the Leg
Extension with the hole in the
Seat Backbone to fit your height
and secure with the Lock Knob
as shown .
Lock Knob
Seat
Backbone
Leg
Extension
Backbone
Assembly Guide
step 11 Install Seat Back Pad
note: The back of the Seat Back Pad has two pairs
of holes . Select the appropriate
set based on your height .
Parts:
• Seat Back Pad
• Main Assembly
Hardware:
• 2 Button Head Screws (5/16" X 2 1/2")
• 2 Washers (5/16")
tool: 3/16" Hex Wrench
11-1 Position Seat Back Pad against the
Seat Support Rail and align the
screw holes for your height with
those on the Seat Support Rail .
11-2 Secure Seat Back Pad to the Seat Support
Rail using screws and
washers as shown .
Button Head Screw
Washer
Seat Back
Seat Support
Rail
Seat Back
Seat Support Rail