Security pin entry, Security pin entry -15 – NETGEAR N150 Wireless Router WNR1000 User Manual
Page 40
N150 Wireless Router WNR1000 User Manual
2-14
Safeguarding Your Network
v1.0, January 2009
4. Click the
button in the Add WPS Client screen. The Connecting to New Wireless Client
screen displays.
The green
light on the N150 Wireless Router begins to blink in a regular pattern. While
the button light is blinking, you have 2 minutes to enable WPS on the device you are trying to
connect to the router.
5. In the wireless client, follow its specific networking instructions to enable WPS, to allow it to
connect to the router.
The N150 Wireless Router’s green
light ceases blinking and remains on when one of
these conditions occurs:
•
The router and the client establish a wireless connection.
•
The 2-minute window period expires for establishing a WPS connection. If the connection
is not established, no WPS security settings will be specified in the N150 Wireless Router.
Security PIN Entry
There are two ways to enable a wireless client to join a network using a PIN: using the router’s
security PIN or using the wireless client’s security PIN.
Using the Router’s Security PIN
1. Obtain your router’s security PIN from the rear panel of the router or from the Advanced
Wireless Settings screen.
2. On the wireless client, follow its specific networking instructions to enter the router’s security
PIN and to establish a wireless connection with the router.
Using the Wireless Client’s Security PIN
1. Log in to the router as described in
“Logging In To Your Wireless Router” on page 1-2
.
Figure 2-7