NETGEAR wndr3700 User Manual
Page 34
RangeMax™ Dual Band Wireless-N Gigabit Router WNDR3700 User Manual
Safeguarding Your Network
2-12
v1.3, October 2009
To configure WPA or WPA2 in the wireless router:
1. Log in to the wireless router at its default LAN address of http://www.routerlogin.net with
its default user name of admin and default password of password, or using whatever
password and LAN address you have chosen for the wireless router.
2. Select Wireless Settings from the main menu.
3. On the Wireless Setting screen, select the radio button for the WPA or WPA2 option of your
choice.
4. The settings displayed on the screen depend on which security option you select.
5. For WPA-PSK or WPA2-PSK, enter the passphrase.
6. For WPA/WPA2 Enterprise, enter the settings for the Radius server. For WPA-802.1x or
WPA2-802.1x, these settings are required for communication with the primary Radius server.
•
WPA Mode. Select WPA [TKIP], WPA2 [AES], or WPA [TKIP] + WPA2 [AES].
•
RADIUS Server IP Address. The IP address of the Radius server. The default is 0.0.0.0
•
RADIUS Server Port. Port number of the Radius server. The default is 1812.
•
RADIUS Server Shared Secret. This shared key is shared between the wireless access
point and the Radius server during authentication.
7. To save your settings, click Apply.
Figure 2-4