Chauvet COLORstrip - Manual (Page 11)

COLORstrip™ User Manual (Rev. 5) Page 11 of 17
Configuration
(Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.
Automatic Mode To enable the Automatic Mode, do the following:
1. Press
repeatedly until SYS or ACt shows on the display.
2. Use or to select ACt.
3. Press .
4. Use or to choose your desired program (A000–A023).
5. Press .
Certain programs will have additional functionality. To find these options, press
after selecting an auto program. Then press or . Not every
program will feature all the added functionality.
Function
Description
F000–F100 Flash speed (slow to fast)
P000–P100 Run speed (slow to fast)
C000–C100 Color