Poulan 163598 - Manual (Page 15)

IS^№SSS^I^№l8SSg^*S
CUSTOMFR RFRPONSIBIl ITIES
ENGINE
LUBRICATION
Only use high quality detergent oil rated with API seiwice
• • 1- ific ji' ^<.1. > I ' * I ~ • i if le i j i l &L V ' ( ' lur
I jii-r, ' rfJir > -. I . 1 fi|
eiol'
'Ij i-n t ' n €
TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE
FIG. 15
NOTE; Although nult'-'/isccsity oi*s (5W30, iOWJSQ etc ,«
impro'/e starftpg ¡n cold weather^ these f^iuiti-vscosity o‘is
will result in increased oil consumpticn when used above
32' F. Check your engine on level more frequently to avoid
possible engine damage from running low on oil.
Change the oil after every 25 hours of operation or at least
once a year if the tractor is not used for 25 hours in one year.
Check the crankcase oil level before starting the engine
and after each eight (8) hours of operation. Tighten oil fill
cap/dipstick securely each time you check the oil level.
TO CHANGE ENGINE OIL (See Figs. 15 and 16)
Determine temperature range expected before oil change.
All oil must meet API service classification SF, SG or SH.
• Be sure tractor is on level surface.
• Oil will drain more freely when warm.
• Catch oil in a suitable container.
« Remove oil fill cap/dipstick. Be careful not to allow dirt
to enter the engine when changing oil.
• Remove drain plug.
• After oil has drained completely, replace oil drain plug
and tighten securely.
• Refill engine with oil through oil fill dipstick tube. Pour
slowly. Do not overfill. For approximate capacity see
“PRODUCT SPECIFICATIONS” on page 3 of this
manual.
• Use gauge on oil fill cap/dipstick for checking level. Be
sure dipstick cap is tightened securely for accurate
reading. Keep oil at “FULL” line on dipstick.
AIR FILTER (See Fig. 17)
Clear
tiofi 0
hours
Servii
• R
igine
lefoa
3verv
pr
iration
cleans
sane
Ser
very
more
iroperly using a d
rafter every 25 hoi
/ice paper cartridc
season, whicheve
}ften
ry air
’S
of
Q
r oc
ions.
r'>. u 1. ^ 1" ( /1 C _ '<1
TO SFFo/N E FRF ( LEANT B
Slide foam pre-cleaner off cartridge.
Wash it in liquid detergent and water.
Squeeze it dry in a clean cloth.
Saturate it in engine oil. Wrap it in clean, absorbent
cloth and squeeze to remove excess oil.
If very dirty or damaged, replace pre-cleaner.
Reinstall pre-cleaner over cartridge.
Reinstall cover and secure with knob(s).
TO SERVICE CARTRIDGE
Remove cartridge nut.
Carefully remove cartridge to prevent debris from
entering carburetor. Clean base carefully to prevent
debris from entering carburetor.
Clean cartridge by tapping gently on flat surface. If
very dirty or damaged, replace cartridge.
Reinstall cartridge, nut, precleaner, cover and secure
with knob(s).
IMPORTANT: PETROLEUM SOLVENTS, SUCH AS
KEROSENE, ARE NOT TO BE USED TO CLEAN THE
CARTRIDGE. THEY MAY CAUSE DETERIORATION OF
THE CARTRIDGE. DO NOT OIL CARTRIDGE. DO NOT
USE P R E S S U R I Z E D A I R T O C L E A N O R D R Y
CARTRIDGE.
17