Troy-Bilt 14066 - Manual (Page 4)

CM-BCKUSTS
( 1 ) Pre-Delivery Chacktist'
After the machine has been completely assembled and lubricaied, inspect it ihorcughiy
operating properly before delivering it to the customer. The foiiowing checklist is a rem
inspect. Check off each item as it is found satisfactory or after proper adjustment is me
■;e C'5"'ain it is
■re j;nts to
Check to make sure loader is completely assembled according to assembly r siructions.
Check ai! boits to make sure they are tightened to specified toraue value.
Inspect and, if necessary, lubricate aii lubrication points. Maks sure ali fittings are in piace and
taking grease properly.
Inspect all hydraulic hoses, lines and fittings to make sure they are insralied crepsriy and not
leaking.
Make sure hydraulic hoses are properly routed and will not be damaged when the loader is rais­
ed or lowered.
Start tractor, raise and lower loader and operate bucket cylinders and make sure unit is
operating properly.
Check hydraulic fluid level. Add hydraulic fluid as required. Use Type “A” Hydraulic Fluid or
Equivalent.
Inflate tractor’s front tires to 28 psi.
(2) Delivery Checklist
Explain warranty, then complete warranty registration forms, listing the serial
number of the loader. Dealer and customer must sign forms.
Explain importance of proper lubrication, and indicate all lubrication points on the loader.
20-1