MTD 315B - Manual (Page 11)

6. Remove the hex bolt and lock washer from the
engine pulley. See figure 19. Slip the engine pul­
ley off the engine shaft, and remove the belt from
the pulley.
7. Loosen the nut on the stop bolt until there is
clearance between the support bracket and the
friction wheel disc. See figure 20.
8. Slip the belt between the friction wheel and fric­
tion wheel disc. Remove and replace belt.
Reassemble following instruction in reverse
order.
NOTE:
The support bracket m ust rest on the stop bolt
after the new belt has been assem bled.
Support
OFF-SEASON STORAGE
The following steps should be taken to prepare your
chipper-vacuum for storage.
1. Remove all dirt from exterior of engine and equip­
ment.
2. Refer to engine manual for correct engine storage
instructions.
3. Wipe unit with an oiled rag to prevent rust (use a
light oil or silicone), especially if storing in an
unventilated or metal storage shed.
4. Store in a dry, clean area. Do not store next to
corrosive materials, such as fertilizer.
OPTIONAL EQUIPMENT
Hose Attachment Kit Model 290-005 is available as
optional equipment.
Model No. -315B
Spark Plug J-8C
Air Filter Element 33268
Air Pre-Cleaner 35881
Engine Oil (SAE 30) 737-0208
(26 oz. req’d.)
Chipper Blade (Standard) 781-0490
Chipper Blade (Tooled Steel) 742-0544
Bag 764-0472
Safety Glasses 723-0400
Vacuum Hose Kit (Optional) 290-005
The only way to ensure the performance of your
product is to use original equipment parts and
accessories, which are designed and engineered to
exacting specifications. When you substitute, you take
a chance on quaiity, reliabiiity, safety and per­
formance. Use originai equipment parts—See your
iocal service deaier.
11