MTD 315B User Manual
Owneirs guide, Chipper- vacuum model series 315b
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OWNEirS GUIDE
• ASSEMBLY • OPERATION • MAINTENANCE •
CHIPPER-
VACUUM
Model Series
315B
IMPORTANT!
Record the
Model No.
and
Mfg. Code
which
appear on your unit in the space below. You
must
have these numbers, along with the date
of purchase, in order to receive warranty or ser
vice.
Important:
Read Safety Rules
and Instructions Carefully
MODEL NO.
SERIAL NO.
Made ^
in
AMERICA
WARNING:
This unit is equipped with an internai combustion engine and should not be used
on or near any unimproved forest-covered, brush-covered or grass-covered land unless the
engine’s exhaust system is equipped with a spark arrester meeting applicabie local or state
laws (if any). If a spark arrester is used, it should be maintained in effective working order by
the operator.
in the State of California the above is required by law (Section 4442 of the California Public
Resources Code). Other states may have similar laws. Federal laws apply on federal lands.
A spark arrester for the muffler is available through your nearest engine authorized service
dealer or contact the service department, P.O. Box 368022, Cleveland, Ohio 44136-9722.
FORM NO. 770-8920K
Document Outline
- OWNEirS GUIDE
- IMPORTANT!
- A
- TO REMOVE CHIPPER-VACUUM FROM CARTON
- TOOLS REQUIRED FOR ASSEMBLY
- LOOSE PARTS IN CARTON (See Figure 1)
- ATTACHING THE FRONT WHEELS
- AHACHING THE NOZZLE (See figure 3)
- ATTACHING THE CHIPPER CHUTE AND SUPPORT BRACKET (See figure 4)
- ATTACHING THE CLUTCH CABLE
- ATTACHING THE BAG
- INSTALLING THE SHIFT KNOB
- DRIVE CLUTCH HANDLE
- GAS AND OIL FILL-UP
- TO START ENGINE
- TO STOP ENGINE
- TO ENGAGE DRIVE
- HOW TO USE THE CHIPPER
- HEIGHT ADJUSTMENT
- CARBURETOR ADJUSTMENT
- CLUTCH CABLE ADJUSTMENT
- SHIFT RDD ADJUSTMENT
- LUBRICATIDN
- CLEANING
- ENGINE
- REMOVING THE FLAIL SCREEN
- SHARPENING OR REPLACING CHIPPER BLADES
- CHANGING THE FRICTION WHEEL RUBBER
- BELT REMOVAL AND REPLACEMENT
- SERVICE DEPARTMENT • P.O. BOX 368022 • CLEVELAND, OHIO 44136-9722