MTD 24632-8 User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2.
Periodically check that all nuts, bolts and screws
are tight to be sure equipment is in s.jife
working condition. Where appropriate, check all
safety guards and shields to be sure they are
in the proper position. Never operate your
splitter with safety guards, shields or other pro
tective features removed. These safety devices
are for your protection.
3.
Replace all damaged or worn parts such as
immediately
with
manufacturer
appro\ed
replacement parts.
4.
Do not alter your splitter in any manner such
as attaching a rope or extension to the control
lever or adding to the width or height of the
wedge. Such alterations may cause your
splitter to be unsafe.
5.
Perform all recommended maintenance prc
cedures before you use your splitter.
6.
Never store log splitter outside without a water
proof cover. Rain will cause rust on the inside
of the cylinder.