Start engine, Figure 10 – MTD 241-645A User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

The ram should take approximately 30 seconds to
make a complete cycle. This speed may vary
depending on throttle setting and temperature of oil.

^ START ENGINE

. Place throttle control lever (on beam) in run

position. See figure 8.

2. Move choke lever to CHOKE position. See

figure 9.

THROTTLE CONTROL

/-C443URE 8

Open the breather valve. Valve must be open when
running log splitter. Valve must be closed when

transporting log splitter. See figure 10.

VALVE IN OPEN

POSITION

VALVE IN CLOSED
POSITION

BREATHER PLUG AND VALVE.

NOTE: Valve has left hand threads.

Clockwise to close.

FIGURE 10

Rewind starter _ place one foot on wheel and

with a quick full arm stroke, keep firm grip on

handle and return rope slowly. See figure 11.

FIGURES

FIGURE 11