2. wheel adjustment, Note, B. gasoline – MTD 1850 User Manual
Page 8: 3. checking oil, gasoline, and gear case, Wheel adjustment -2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2-2. WHEEL ADJUSTMENT
The wheel height can be adjusted by removing the
long clevis pin on the wheel hanger and raising or
lowering the setting. The higher the setting the deeper
the tilling depth. See Figure 2-3.
NOTE
b. Gasoline
Remove the gas cap and fill the tank with FRESH
REGULAR GASOLINE. If the gasoline has been in a
metal can for a long period, throw it away and use
fresh gasoline.
Pick a height that places the handles in
FIGURE 2-3. WHEEL HEIGHT ADJUSTMENT
The chain case is sealed and requires no further
lubrication unless the chain case is disassembled for
repair.
2-3. CHECKING OIL, GASOLINE, AND GEAR CASE
NOTE
When packaged for shipment the ma
chine contains no oil or gasoline. Before
starting the engine, oil must be added
to the engine crankcase and gasoline
to the tank. DO NOT mix oil with gaso
line.
a .
on
With the tiller on level ground, remove the oil filler
plug and pour 2% pints of good quality, SAE 30 type
MS engine oil into the crankcase. Replace the oil filler
plug.
2-2