Product specifications, Ustomer responsibilities – Poulan XC1182B User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/720164/3/background.png)
)NGRATULATfONS on your purchase of a new tractor. It
s been designed, engineered and manufactured to give you
; best possible dependability and performance.
lould you experience any problem you cannot easily rem-
y, please contact your nearest Authorized Service Facility,
ey
have
competent, well-trained technicians and the proper
)ls
to repair this unit.
Base read and retain this manual. The instructions will en-
le you to assemble, operate, and maintain your unit prop-
y. Always observe the “SAFETY RULES”.
PRODUCT SPECIFICATIONS
MODEL
NUMBER
SERIAL
NUMBER
XC1182B
DATE OFPUROHASE__________________________
THE MODEL AND SERIAL NUMBERS WILL BE
FOUND ON A
PLATE
UNDER THE SEAT.
YOU SHOULD RECORD BOTH SERIAL NUMBER
AND DATE OF PURCHASE AND KEEP IN A SAFE
PLACE FOR FUTURE REFERENCE.
USTOMER RESPONSIBILITIES
Read and observe the safety rules.
Follow a regular schedule in maintaining, caring for and us
ing your unit.
Follow the instructions under “Maintenance” and "Storage"
sections of this owner’s manual.
HORSEPOWER;
18.0
GASOLINE CAPACITY:
3.5 GALLONS
UNLEADED REGULAR
OIL:
4.0 PINTS (w/filter change)
SAE 30 (or 10W-30)
3.5 PINTS (w/o filter change)
WINTER: SAE 5W-30
SPARK PLUG (GAP.025 IN.):
CHAMPION RV15YC
GROUND SPEED:
1st
.071 MPH
2nd
1.05 MPH
3rd
1.22 MPH
4th
3.24 MPH
5th
4.12 MPH
6th
5.29 MPH
Rev.
1.62 MPH
TIRE PRESSURE:
FRONT: 14 PSI
REAR: 10 PSI
CHARGING SYSTEM;
15 AMPS @3600 RPM
BLADE BOLT TORQUE:
30-35 FT. LBS.
WARNING: This unit is equipped with
an
internal combustion
engine and should not be used on or near any unimproved for
est-covered, brush-covered or grass-covered land unless
the
engine’s exhaust system is equipped with a
spark
arrester
meeting applicable local or state laws (if any) . If a spark arres
ter is used, it should be maintained in effective working order
by the operator.