General recommendations, Before each use, Lubrication – Poulan XC1182B User Manual
Page 15: Maintenance, Lubrication chart
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

MAINTENANCE
Check Brake Operation
l/
✓
Check Tire Pressure
✓
✓
Check for Loose Fasteners
✓
✓
Sharpen/Replace Mower Blades
3
Lubricate Pivot Points
✓
✓
Check Battery Level/Recharge
1
/
Clean Battery and Terminals
i/
✓
Check Engine Oil Level
l/
Change Engine Oil
✓
lX
,2
✓
Clean Air Filter/Foam Pre-cleaner
1/2
Clean Air Screen
1/2
Inspect
Muffler/Spark
Arrester
✓
Change Engine Oil Filter
|X
,2
✓
Clean Engine Cooling Fins
✓2
Replace Spark Plug
✓
✓
Replace Air Filter Paper Cartridge
1/2
Replace Fuel Filter
1 - Change more
often
when
operating
under a heavy load or in high ambient temperatures.
2 - Service more often when operating in dirty or
dusty
conditions.
3 - Replace blades more often when mowing in sandy soil.
GENERAL RECOMMENDATIONS
The warranty on this unit does not cover items that
have
been subjected to operator abuse or negligence. To receive
full value from the warranty, operator must maintain unit as
instructed in this manual.
Some adjustments will need to be made periodically to prop
erly maintain your unit.
Ail adjustments in the Service and Adjustments section of
this manual should be checked at least once each season.
• Once a year you should replace the spark plug, clean or
replace air filter, and check blades and belts for wear. A
new spark plug and clean air filter assure proper air-fuel
mixture and help your engine run better and last longer.
BEFORE EACH USE
• Check engine oil level.
• Check brake operation.
• Check tire pressure.
• Check for loose fasteners.
LUBRICATION
Keep unit well lubricated (See ’’LUBRICATION CHART”)
LUBRICATION CHART
IMPORTANT: Do not oil or grease the pivot points
which
have special
nylon bearings. Viscous lubricants will attract dust and dirt that
will
shorten the life of the self-lubricating bearings. If you
feel
they must be
lubricated, use only a dry, powdered graphite type lubricant sparingly.