Citizen Systems iDP-3423 - Manual (Page 80)

iDP-3420/3421/3423 User’s Manual
80 CITIZEN
LF
[Function] Printing and paper feed
[Code] <0A>H
[Outline] If the print buffer contains the data, this command will feed the line after
printing. If not, the command only feeds the line.
CR
[Function] Printing
[Code] <0D>H
[Outline] This command prints the data. If the DIP switch segments 1 to 6 are set to OFF,
the printer will print the data in the print buffer and feed the paper by one line.
If they are set to ON, the printer will print the data in the print buffer and will
not feed the paper.
ESC "z"
[Function] Setting the 1/6-inch line feed width
[Code] <1B>H <7A>H
[Outline] This command sets the line feed width to 1/6 inch (Default).