Citizen Systems iDP-3423 - Manual (Page 118)

iDP-3420/3421/3423 User’s Manual
118 CITIZEN
ESC "p" m n1 n2
[Function] Specifying the pulse generation
[Code] <1B>H <70>H m n1 n2
[Range] 0 £ m £ 1
0 £ n1 £ n2 £ 255
[Outline] This command outputs the signals specified with n1 and n2 to the connector pins.
m Connector Pin
0 Drawer kick connector No. 2 pin
1 Drawer kick connector No. 5 pin
The ON time is n1´2 mS and the OFF time is n2´2 mS.
[Caution] The user should consider driving the drawer at the following duty ratio.
ON time ¸ (ON time + OFF time) £ 0.2
(It is recommended to make n2 four times higher or more than n1.)
The drawer kick-out solenoid should have a resistance value of 36W or more. Do
not use a lower one because an overcurrent will flow. For the drawer power, be
sure to use the printer power (Drawer kick-out connector No. 4 pin).