Troy-Bilt TUFFY 634BM User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MODELS 630C, 634F & 634В
(A)
For Mode! 630C
(B)
For Mode! 634F
(C)
For Model 634B
REF
N0.
PART N0.
DESCRIPTION
1
GW-9517
Snap Ring
2
GW-1714
Bearing, Tapered Roller (with race)
3
GW-50043
Support Washer, Rear
4
1904277
Drive Shaft
(A) (B|(G|
5
GW-1224-1*
Shim, Rear Bearing Gap, .010“thick
GW-1224-2*
Shim, same as above, except .030“ thick
GW-1224-3*
Shim, same as above, except .005" thick
GW-1224-4*
Shim, same as above, except .062“ thick
GW-1325C
Shim Set (Incl. the following shims:
two #1224-1, two 1224-2 & one #1224-4)
Use as required to obtain between .005” and .015” allowable end-play.
2 6
This manual is related to the following products: