Unit safety, Walk around inspection, Clearances – Ariens 009-1648 User Manual
Page 8: Work area, Clear work area, Avoid falls, Slippery surfaces, Visual obstruction, Safety surfaces, Safety guards and devices
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

U
nit
S
afety
Walk Around Inspection
Complete a walk around inspection of
unit and work area to understand:
• Work area
• Your unit
• All safety decals
Clearances
ALWAYS check overhead and side
clearances carefully before operation.
ALWAYS be aware of traffic when
operating along streets or curbs.
Work Area
Keep children and people away.
Keep children out of work area and
under watchful care of a responsible
adult.
Clear Work Area
Keep area of operation clear of all
toys, pets, and debris. Thrown objects
can cause injury.
Avoid Falls
Check for weak spots on dock, ramps
or floors. Avoid uneven work areas
and rough terrain.
Slippery Surfaces
Avoid siippery surfaces. ALWAYS be
sure of your footing.
DO NOT operate on wet grass to
avoid siiding.
Visual Obstruction
Dust, smoke, fog, etc. can reduce
vision and cause an accident.
Operate unit only when there is good
visibility and light.
Safety Surfaces
Keep all nonskid surfaces clean.
Replace safety treads if worn,
damaged, or missing.
Safety Guards and Devices
ALWAYS keep protective structures,
guards, and panels in good repair, in
place and securely fastened.
NEVER modify or remove safety
devices.
Discharge Covers
ALWAYS keep discharge cover or
complete grass catcher in place and
in proper working condition.
Safety Interlock System
Safety Interlock System must function
properly. DO NOT operate unit if
operator presence controi is damaged
or disabled.
Modification
NEVER modify, alter, or permit
anyone to modify or alter the unit or
its components.
Brakes
Check brake operation frequently.
Adjust and service as required.
No Step
DO NOT step on rotary mower deck.
Ariense EZRider™ Rev. 1/97