Canon CDI-E334-010 - Manual (Page 88)

Shooting Using the Mode Dial 86
See Functions Available in Each Shooting Mode (p. 206).
You can manually set the shutter speed and aperture to shoot images.
Manually Setting the Shutter Speed
and Aperture
Shooting Mode
1
Set the mode dial to .
2
Configure the shutter speed and aperture set-
ting.
1. Use the button to select shutter speed or aperture, and use
the or button to change the option.
3
Shoot.
• When you press the shutter button halfway, the difference
between the correct exposure* and the selected exposure
appears on the LCD monitor. If the difference is more than ±2
stops, “–2” or “+2” appears in red.
* Correct exposure levels are calculated by measuring light according to the
currently selected metering mode.
z If the zoom is adjusted after these values are set, the shutter
speed or aperture value may change in accordance with the
zoom position (p. 84).
z The LCD monitor’s brightness matches the selected shutter
speed and aperture value.
When you select a fast shutter speed or shoot a subject in a
dark place, the image will always be bright if the flash is set
to
(Flash on).