Operation, A warning, Engine – Troy-Bilt 13034 User Manual
Page 15: A caution
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Section 5
Operation
□
PRE-OPERATION CHECKLIST
□
□
Perform the following checks before each
use of your unit:
A
WARNING
BEFORE OPERATING THIS UNIT, READ
AND UNDERSTAND ALL SAFETY,
CONTROLS AND OPERATING
INSTRUCTIONS IN THIS MANUAL.
ALSO, READ ALL MATERIAL PROVIDED
Vi/ITH ANY AHACHMENTS TO BE USED
WITH THIS UNIT. READ AND FOLLOW
ALL SAFETY AND OPERATING
INSTRUCTIONS ON THE DECALS ON THIS
UNIT AND AHACHMENTS.
A
CAUTION
DO NOT RUN ENGINE WITH HOOD OPEN.
HOOD DAMAGE MAY OCCUR.
Engine
1. Check for proper engine oil level as
follows:
□ a. Remove oil dipstick (A, Fig. 5-1).
Wipe oil from dipstick with clean cloth.
□ b. Screw dipstick firmly back in place
in engine.
□ c. Remove dipstick and check oil level.
Oil level is indicated by marks on
dipstick. Level should be between "Full”
and “Add" marks (Fig. 5-1).
□ d. If necessary, add oil to crankcase
through dipstick opening.
A
CAUTION
DO NOT ADD OIL BEYOND FULL MARK.
ENGINE DAMAGE MAY OCCUR.
Determine type of oil by following
recommendations indicated in engine
manual.
15