Right view, Brake locked, N, fig. 4-2)—mower height adjusting knob – Troy-Bilt 13034 User Manual
Page 13: 0, figs. 4-3 & 4-5)—brake pedal, P, fig. 4-3 & 4-5)—parking brake, Nsnsn, Features & controls (conti nued)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Features & Controls (conti nued)
Fig. 4-2
Right View
(L, Fig. 4-2)—Travel Pedal
(Hydrostatic Drive units only)
Controls forward and rearward movement
of tractor. Pressing top of pedal moves
unit forward, pressing bottom moves unit
in reverse. Transmission is in neutral
when pedal is centered.
(M, Figs. 4-2 & 4-4)—Gear Shift Lever
(Gear Drive units only)
Controls forward and rearward movement
of tractor. Also controls travel speed of
unit. Five forward speeds, neutral and
reverse speeds are available. See shifting
pattern in Fig. 4-4.
C
nsnsn
£3
Fig. 4-5
Brake Locked
(N, Fig. 4-2)—Mower Height Adjusting
Knob
Note: Use only when lift is in raised
position.
Allows infinitely variable cutting heights
for mower deck attachments. Rotating in
“+” direction increases attachment height,
rotating in direction decreases
attachment height. One rotation of knob
moves deck 1/4”.
(0, Figs. 4-3 & 4-5)—Brake Pedal
Press pedal to apply brake. Brake pedal
does not stop attachment/PTO drive
operation. Brake must be applied to start
engine.
Note; Brake pedal must be fully
depressed to engage parking brake, if
brake is inoperative, service
immediately—DO NOT OPERATE UNIT!
(P, Fig. 4-3 & 4-5)—Parking Brake
Located just forward of brake pedal. To
engage, fully depress brake pedal and
press parking brake with toe. Brake pedal
will remain depressed if parking brake is
13