Features & controls (continued) – Troy-Bilt 13034 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Features & Controls (continued)
NOT OPERATE UNIT!
Press and release
brake pedal to disengage parking brake.
(Q, Fig. 4-3)—Attachment Lift Lever
Controls attachment lift. See page 20 for
more detailed lift information.
Unlock lift before raising or lowering.
Lock lift down when cutting rough, uneven
terrain and when using mulching decks.
To lock, push lever completely down until
button pops out. Note: Always lock lift
down when using mulching decks.
TO RAISE OR LOWER LIFT:
TO UNLOCK LIFT WHEN IN RAISED
POSITION: Pull lift lever up slightly to
unload lift mechanism. Press button at
front of lift lever to release lock.
TO UNLOCK LIFT WHEN IN LOWERED
POSITION: Push lift lever down slightly to
unload lift mechanism. Press button at
front of lever to release lock.
Release button. Pull lift lever up to raise
down (or up) until button pops out.
(R, Fig. 4-3)—Steering Wheel
Controls travel direction of unit. Turning
radius is 22” as measured from the inside
of the rear wheel.
(S, Fig. 4-6)—Fuel Level Window
Provides view of fuel tank. Fuel level is
visible through fuel tank.
14