Handle adjustment lever, Figure 19, Handle has three vertical positions in the center – MTD 214-412-000 User Manual

Page 10: Handle has three vertical positions to the left, Figure 21

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

FIGURE 17.

Handle Adjustment Lever

The handle adjustment lever is located (»n the

right hand handle bar. See figure 18.

Squeeze up on handle adjustment lever anc place
the handle in one of nine (9) positions. See figures

19, 2C and 21.

If the locking pin does not withdraw from the han

dle positioner assembly or if the locking pin does

not seat securely into the holes in the handl 5 posi

tioner assembly, adjustment is required. Refer to
Adjustment Section on page 13.

FIGURE 19.

Handle has three vertical

positions in the center

Handle has three vertical

positions to the right

FIGURE 20.

Right Hand

Handle Bar

i-*

ilH!

¡.

‘ •*

'Hafndl'e

Adjustments .r ^

'W,

Handle has three vertical

positions to the left

'•ts ■

'■f i

■I' 1

FIGURE 18.

FIGURE 21.