2. presser foot lifter, 3. beginning and ending of sewing – SINGER WSL7234 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3. FOUR THREAD OVEREDGING
STITCH USING 2 NEEDLES
3-1. Before Sewing
After threading is completed, and when the threads
are not wound around the stitch finger, gently
draw out the four threads under and behind the
presser foot, and turn the handwheel towards you
by hand two or three times to make the thread
wind on to the needle plate.
3-2. Presser Foot Lifter
For setting average material, there is no need to
lower the presser foot lifter.
When beginning to sew. push the material just in
front of the presser foot and it will be fed through.
For the thick material, lower the presser foot lifter,
place the material under the presser foot, then
raise the presser foot lifter.
3-3. Beginning and Ending of Sewing
(1) Beginning to sew
Just put your left hand on the material to push
it slightly until the tip of the fabric comes exactly
behind the presser foot.