Hinged presser fool, Zipper foot, Changing presser feet – SINGER 719 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

• Hinged presser foot on your machine.
• Zipper foot.
Hinged Presser Fool
The
hinged
presser
foot
on
your
machine
is
used
for
most
of
your
sewing.
It
is
made
to
ride
smoothly
over
varying
fabric
thicknesses
and
pins.
Zipper Foot
This
foot
is
used
to
place
stitching
close
to
a
raised
edge.
Thus,
it
is
as
useful
for
corded
seams
and
tubular
cording
as
it
is
for
zipper
insertion
(page
23).
It
can
be
adjusted
to
either
the left or right side of the needle.
Changing Presser Feet
1. Raise needle to its highest position and
raise the presser foot,
2. Loosen presser foot screw and remove the
foot,
3. Hook new foot around the presser bar and
tighten presser foot screv/.
4. PRESSER FEET
Hinged Presser Foot
Zipper Foot
Pressor Feel
Changing Presser Feet
- 401A (116 pages)
- Simple 3116 (94 pages)
- 1507 (88 pages)
- 1507WC (88 pages)
- 112W140 (32 pages)
- 147-2 (30 pages)
- 114-33 (43 pages)
- 119-3 (23 pages)
- 14K1 (10 pages)
- 147-104 (34 pages)
- 116-1 (20 pages)
- 115-2 (38 pages)
- 14U286 (40 pages)
- 14U286B (21 pages)
- 114-4 (29 pages)
- 142W25 (10 pages)
- 147-81 (28 pages)
- 118 (16 pages)
- 136W105 (22 pages)
- 114-41 (20 pages)
- 147-4 (28 pages)
- 105-3 (30 pages)
- 1027 (36 pages)
- 147-26 (37 pages)
- 12W208 (25 pages)
- 128-4 (25 pages)
- 109-320 (14 pages)
- CP17 (47 pages)
- 147-6 (56 pages)
- 132B26 (9 pages)
- 114-2 (36 pages)
- 1371A3 (86 pages)
- 14CG754 (53 pages)
- 147-50 (39 pages)
- 14T967DC (3 pages)
- 109-520 (13 pages)
- 14SH654 ULTRALOCK (48 pages)
- 147-86 (30 pages)
- 105-20 (23 pages)
- W303 (13 pages)
- 147-38 (53 pages)
- 114-22 (45 pages)
- 1375A1 (33 pages)
- 107-2 (31 pages)
- 1200A (4 pages)