SINGER W311 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
WINDING THE BOBBIN
Place the spool of thread on the spool pin (6) and draw
out about 12" of thread through tension bracket. Wine
thread on to the bobbin seven or eight times toward you. Thet
set the bobbin on the spindle (A) of the bobbin winder. Shouk
the bobbin wind unevenly, slide tension bracket to left or ngh
as required.
To set the bobbin, put the bobbin on the spindle (A) ai
'
jwn,
pushing up the stop latch (B).
After setting the bobbin, push the lever (C) down and th.
rubber ring will touch the balance wheel. Then turn the balano
wheel toward you and run the machine slowly to wind the bob
bin evenly.
When the bobbin is full, it will automatically come to a stof
Cut the thread and remove the bobbin and retighten balanc
wheel for sewing.
In order to sew and wind bobbin simultaneously, do nc
loosen the balance wheel.