Regulating pressure on material – SINGER W311 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
This mechanism drops the feed dog under the needle pi,
when the material is required to be moved freely by hand
embroidering and darning.
When the left button is pushed completely down (mark
DOWN,), it enables the material to be moved freely under t
presser foot, which is convenient for embroidery, darning, et
For sewing very light material, push the center button co
pletely down (marked SILK).
For ordinary sewing, push the right button completely doi
(marked UP), when the three buttons are always up and evi
REGULATING PRESSURE ON MATERIAL
To increase pressure for heavy materials, press (A) downwai
and to release pressure for light materials, darning, etc., press(j
dowm when (A) will automatically release the pressure.
When darning, lower the presser bar lever and yon are rea
to darn or embroider.
“Note:
When reverting to normal sewing, do not forget
press A into position to give the required pressure on tl
presser foot, otherwise the machine will not feed properly.
ADJUSTING THE DROP FEED