SINGER W311 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CHANGE NEEDLE POSITION LEVER
Needle position lever is to set a needle position- LEFT ►, CEN^
TER ♦ and RIGHT
M
by removing the lever at a desired position.
1.
Set needle position lever (E) at the left and remove zigzag stitch
width dial slowly to a desired position and back it to the “0”
point, then a left-lined stitching is attained.
2.
Set needle position lever at the center and remove zigzag stitch
width dial to a desired position and back the lever to the starting
point, and repeat it. Then, a center-lined stitching is attained,
3 Set needle position lever at the right and remove zigzag stitch
width dial slowly to a desired position and back it to the “0”
point, then repeat it and a right-lined stitching is attained.