Adjusting the upper thread tension – SINGER W311 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
10
(a)
Stop the machine when the needle is at its highest po
(b)
Lift the presser bar lever and draw the material to the
hand side and to the rear of the mtuhine.
(c)
Passing the threads over the thread cutter as shown, ]
down lightly and cut the threads.
(d)
Always leave three to four inches of thread for !uri
sewing.
REMOVING THE MATERIAL
ADJUSTING THE UPPER THREAD TENSION
(a) In most cases the perfect stitch can be obtained liy reg
ting the upper thread tension. To increase the upper thr
tension, turn the tension dial clockwise, and to decre.
turn it anti clockwise.
t b; The tension dial should not t)e turned abruptly Imt 1
liy little until the desired tension is obtained, and alw
make sure that the presser foot is down when rnah
tension adjustments.